B2ocled Retro Kitchen Pendant Lighting Over Island Metal White Paint Large Hanging Light Fixture for Bar,1-Light ,12 inch Diameter

Awaiting product image

  • NOTE: This lamp doesn’t contain light bulbs.If you need to buy Edison bulbs, pls search: B01NCOBK22
  • Wire Length:39.4in;High thickness aluminum shade, metal parts, durable wear.
  • E26 / 27 commonly used specifications, can use energy-saving light bulbs or LED, it is recommended to use a medium-sized light bulb.
  • Retro industrial style hanging lamp , bar or restaurant decoration more. The fixture is Hard-Wired, suitable for indoor decoration and renovation.
  • 1-year limited warranty against defects in materials and workmanship.

See below for more details.
Browse Wishlist
Category: Tag:
000

B2ocled 1-Light Pendant, Retro Industrial Pendant Lighting, White Paint, Metal aluminum, 12 inch diameter, Ceiling Lights

Note: This product don’t contain light bulb, if you need to buy LED Edison bulbs, search: B2ocled 

Materials: Iron and aluminum
Size: 300mm/12″ diameter, 160mm/6.3″ height
Cord length: 1m/3.28ft
Net weight: 1kg/2.2lb
Screw: E26
Voltage: 85-220V

People’s perception of it:

  • This vintage and classic style, decorative in the room does not seem obtrusive and gives you an old time feeling.
  • Strong quality, but not heavy, the surface after grinding and spray paint processing, more wear-resistant.
  • Installation is convenient, no need for extra damage to the ceiling, a direct fixed parts, fitted with a light bulb can be used safely.

Matters needing attention:

  • For a safe and secure installation, please ensure that the electrical box to which this fixture will be mounted is properly attached to a structural member of the building.
  • All wires are connected. When unpacking, be careful not to pull with wires as a bad connection may result.
  • Do not connect electricity until your fixture is fully assembled.

Note: Random sampling measurement error, because of the different methods of measurement for each person.

Brass brushed metal cap
works well with any E26 base Edison bulb or incandescent bulbs (3-60watts).

3.28 feet of hard wiring
Can according to the length of the required self-cutting (cut from the ceiling wiring, not extended).

Because it is a small lamp, so the wiring project is not ground. If you need it, you can connect the reserved ground wire to the canopy.